日本又黄又粗暴的视频-日本有码中文字幕第一页在线播-日本有码中文字幕第二页-日本有码在线中文字幕-日本遊學打-日本遊學

2K SOLVENTBORNE ACRYLIC POLYURETHANE TOPCOAT

PRODUCT DESCRIPTION

This is a two-component chemically curing aliphatic acrylic polyurethane coating.It has a gloss finish with very good gloss retention.It is a high solids product.The product is suitable for application by brush and roller.The product has good application properties.To be used as topcoat in atmospheric environments.

FEATURES & APPLICATION

• Excellent weather resistance; 

• Excellent gloss and color retention; 

• Dry film is tough, non-chalking, non-yellowing; 

• Excellent decoration and quick drying; 

• Excellent water resistance, chemical resistance, oil resistance; 

• Good impact resistance, wear resistance.

Polyurethane topcoat is suitable for shipbuilding industry and coastal steel structure anti-corrosion coating,can also be used for container trucks and large steel facilities,storage tank exterior anti-corrosion,wind power tower cylinder anti-corrosion..

PRODUCT PICTURES

Front	Back

APPLICATION AREAS

Substations	Substations	Transmission line	Transmission line

RECOMMENDATION

Recommended viscosity: 

• Airless spray: 45″—55″ 

• Air spray: 20±2″ 

• Brush: 35″—45″

Surface preparation: 

• Primer surface should be clean and dry, free of dirt. 

• Pay attention to the coating interval between midcoat and topcoat.

Safety Precautions: 

• The following measures shall be guaranteed during any paint applications: 

• Avoid skin and eye contact; 

• In case of skin or eye contact, flush with a large amount of water and immediately get medical attention; 

• Assure good ventilation; 

• Observe all health and safety regulations on-site.

COMBINED SOLUTION FOR REFERENCE

1.Cost-effective solution for normal and low-pollution environment

   Epoxy Iron Red Primer + Polyurethane topcoat

2.Cost-effective solution for moderately polluted environment

   Epoxy zinc rich primer + Polyurethane topcoat

3.Cost-effective solution for heavily polluted environment

   Epoxy zinc rich primer + Epoxy MIO micaceous iron oxide intermediate coat + Polyurethane topcoat

TECHNICAL DATA SHEET